Cybereason Source

The Cybereason Source provides a secure endpoint to receive authentication logs from the Cybereason Malops API. It securely stores the required authentication, scheduling, and state tracking information.

info

The Cybereason API documentation is not public and can only be accessed by partners or customers.

If you want to explicitly allow the static IP addresses used for this Source on Cybereason see our table of static IP addresses by deployment.

States

A Cybereason Source tracks errors, reports its health, and start-up progress. You’re informed, in real-time, if the Source is having trouble connecting, if there's an error requiring user action, or if it is healthy and collecting by utilizing Health Events.

A Cybereason Source goes through the following states when created:

Pending. Once the Source is submitted, it is validated, stored, and placed in a Pending state.
Started. A collection task is created on the Hosted Collector.
Initialized. The task configuration is complete in Sumo Logic.
Authenticated. The Source successfully authenticated with Cybereason.
Collecting. The Source is actively collecting data from Cybereason.

If the Source has any issues during any one of these states, it is placed in an Error state.

When you delete the Source, it is placed in a Stopping state. When it has successfully stopped, it is deleted from your Hosted Collector.

On the Collection page, the Health and Status for Sources is displayed. Use Health Events to investigate issues with collection. You can click the text in the Health column, such as Error, to open the issue in Health Events to investigate.

Duo health error.png

Hover your mouse over the status icon to view a tooltip with details on the detected issue.

health error generic.png

Authentication

You need to have a Cybereason username and password as well as your customer-specific host, such as mydomain.cybereason.net. If you have a customer-specific port this should be included, such as mydomain.cybereason.net:8443.

Create a Cybereason Source

When you create a Cybereason Source, you add it to a Hosted Collector. Before creating the Source, identify the Hosted Collector you want to use or create a new Hosted Collector. For instructions, see Configure a Hosted Collector.

To configure a Cybereason Source:

In Sumo Logic, select Manage Data > Collection > Collection.
On the Collectors page, click Add Source next to a Hosted Collector.
Select Cybereason.
Enter a Name to display for the Source in the Sumo web application. The description is optional.
(Optional) For Source Category, enter any string to tag the output collected from the Source. Category metadata is stored in a searchable field called _sourceCategory.
Forward to SIEM. Check the checkbox to forward your data to Cloud SIEM Enterprise. When configured with the Forward to SIEM option the following metadata fields are set:
- _siemVendor: Cybereason
- _siemProduct: Endpoint Security
- _siemFormat: JSON
- _siemEventID: <eventType> Where event_type is the value of the field malopDetectionType from the JSON event.
(Optional) Fields. Click the +Add Field link to define the fields you want to associate, each field needs a name (key) and value.
- A green circle with a check mark is shown when the field exists in the Fields table schema.
- An orange triangle with an exclamation point is shown when the field doesn't exist in the Fields table schema. In this case, an option to automatically add the nonexistent fields to the Fields table schema is provided. If a field is sent to Sumo that does not exist in the Fields schema it is ignored, known as dropped.
Cybereason Host. Provide your customer-specific host, such as mydomain.cybereason.net. If you have a customer-specific port this should be included, such as mydomain.cybereason.net:8443.
User email and password. Provide the Cybereason user credentials you want to use to authenticate collection requests.
(Optional) The Polling Interval is set for 300 seconds by default, you can adjust it based on your needs. This sets how often the Source checks for new data.
(Optional) The Back Collection Interval allows you to set, in hours, ingestion for up to 30 days of prior MalOps.
(Optional) Duplicate On Fields, when enabled, each value in the array of machines or users is put into its own log. The entire log is duplicated for each value in the array, where each log gets one value. For example,
```
{
    "data": 1,
    "machine": [1, 2, 3]
}
```
Would be processed into three logs, each with a single value from the machine array, like this:
```
{
    "data": 1,
    "machine": 1
}
{
    "data": 1,
    "machine": 2
}
{
    "data": 1,
    "machine": 3
}
```
When you are finished configuring the Source, click Submit.

Error types

When Sumo Logic detects an issue it is tracked by Health Events. The following table shows the three possible error types, the reason the error would occur, if the Source attempts to retry, and the name of the event log in the Health Event Index.

Type	Reason	Retries	Retry Behavior	Health Event Name
ThirdPartyConfig	Normally due to an invalid configuration. You'll need to review your Source configuration and make an update.	No retries are attempted until the Source is updated.	Not applicable	ThirdPartyConfigError
ThirdPartyGeneric	Normally due to an error communicating with the third party service APIs.	Yes	The Source will retry for up to 90 minutes, after which retries will be attempted every 60 minutes.	ThirdPartyGenericError
FirstPartyGeneric	Normally due to an error communicating with the internal Sumo Logic APIs.	Yes	The Source will retry for up to 90 minutes, after which retries will be attempted every 60 minutes.	FirstPartyGenericError

Restarting your Source

If your Source encounters ThirdPartyConfig errors, you can restart it from either the Sumo Logic UI or Sumo Logic API.

UI

To restart your source in the Sumo Logic platform, follow the steps below:

Open the Collection page, and go to Manage Data > Collection > Collection.
Select the source and click the information icon on the right side of the row.
The API usage information popup is displayed. Click the Restart Source button on the bottom left.
Click Confirm to send the restart request.
The bottom left of the platform will provide a notification informing you the request was successful.

API

To restart your source using the Sumo Management API, follow the instructions below:

Method: POST

Example endpoint:

https://api.sumologic.com/api/v1/collectors/{collector_id}/sources/{source_id}/action/restart

Sumo Logic endpoints like api.sumologic.com are different in deployments outside us1. For example, an API endpoint in Europe would begin api.eu.sumologic.com. A service endpoint in us2 (Western U.S.) would begin service.us2.sumologic.com. For more information, see Sumo Logic Endpoints.

JSON configuration

Sources can be configured using UTF-8 encoded JSON files with the Collector Management API. See how to use JSON to configure Sources for details.

Parameter	Type	Required	Description	Access
config	JSON Object	Yes	Contains the configuration parameters for the Source.
schemaRef	JSON Object	Yes	Use `{"type":"Cybereason"}` for a Cybereason Source.	not modifiable
sourceType	String	Yes	Use `Universal` for a Cybereason Source.	not modifiable

The following table shows the config parameters for a Cybereason Source.

Parameter	Type	Required?	Default	Description	Access
`name`	String	Yes		Type a desired name of the Source. The name must be unique per Collector. This value is assigned to the metadata field `_source`.	modifiable
`description`	String	No	null	Type a description of the Source.	modifiable
`category`	String	No	null	Type a category of the source. This value is assigned to the metadata field `_sourceCategory`. See best practices for details.	modifiable
`fields`	JSON Object	No		JSON map of key-value fields (metadata) to apply to the Collector or Source. Use the boolean field _siemForward to enable forwarding to SIEM.	modifiable
`client_user`	String	Yes		Provide the email address you want to use to authenticate collection requests.	modifiable
`client_password`	String	Yes		Provide the password for the user that you want to use to authenticate collection requests.	modifiable
`polling_interval`	Integer	No	300	This sets how often the Source checks for new data.	modifiable
`back_collection_hours`	Integer	No	0	Sets the number of hours of prior MalOps to collect. Supports 0 to 720.	modifiable
`dup_machines`	Boolean	No	False	Set to true to duplicate logs for each element in the machine array.	modifiable
`dup_users`	Boolean	No	False	Set to true to duplicate logs for each element in the users array.	modifiable

Cybereason Source JSON example:

{
  "api.version":"v1",
  "source":{
    "schemaRef":{
      "type":"Cybereason"
    },
    "config":{
      "back_collection_hours":720,
      "name":"test cybereason",
      "domain":"mydomain.cybereason.net",
      "client_password":"********",
      "polling_interval":300,
      "fields":{
        "_siemForward":false
      },
      "dup_users":true,
      "category":"c2c/cybereason",
      "client_user":"********"
    },
    "state":{
      "state":"Collecting"
    },
    "sourceType":"Universal"
  }

States​

Authentication​

Create a Cybereason Source​

Error types​

Restarting your Source​

UI

API

JSON configuration​