Install a Collector on Linux

Follow the steps in this topic to install or uninstall a collector on Linux. See Installed Collectors for information on other OSs.

System Requirements

Linux, major distributions 64-bit, or any generic Unix capable of running Java 1.8
Single core, 512MB RAM
8GB disk space
Package installers require TLS 1.2 or higher.

Download

Download the collector in either of the following ways:

In Sumo Logic select Manage Data > Collection > Collection. Click Add Collector, click Installed Collector, and then click the link for the collector to begin the download.
Open a browser and enter the static URL for your pod. See Download a Collector from a Static URL for a list of URLs for your deployment pod. The download begins immediately.

Install a collector on Linux

Choose one of these methods to install the Collector:

UI installer - This method does not support all advanced settings.
Command line installer
RPM/Debian package
Binary package

You can build a Collector into a Linux machine image such as an Amazon AMI or VMware image.

After installing Collectors, you can configure Sources from Sumo Logic or by providing the Source settings in a JSON file. If you're using a UTF-8 encoded JSON file, you must provide the file before starting the collector. The JSON file needs to be UTF-8 encoded.

Install using the UI installer

Run the installer on your server with root or Administrator privileges. If you are not logged in as root or Administrator, you might be prompted to reauthenticate to your system when you start the UI Installer.

Open the downloaded installer file.
If prompted, enter the root or Administrator user name and password for the system.
Open the wizard to show the Welcome page. Click Next.
Accept the license agreement and click Next.
Browse to select a location for the collector or accept the default and click Next to install the Collector files on your machine.
The Installer displays the summary of the default settings. If you want to change any of these, click Advanced UI Installer Settings and follow the instructions. Click Next.
Choose an authentication method.
- Access Key: If you have a Sumo Logic access ID and key, click Next, enter the access ID and key, and click Next.
- Installation Token: The Setup Wizard has not yet been updated to provide an option for Installation Tokens. You can provide the Installation Token using the Setup Wizard Token option. Enter the **Token String** you want to use to register the Collector in the input box for a Setup Wizard one-time token.
Click Finish to complete the setup.
In Sumo Logic select Manage Data > Collection > Collection and verify that you can see the Collector. Look for the name that is listed as Collector Name in the confirmation step of this procedure (the name can be customized under Advanced Settings). If a Collector with that name already exists, a suffix is appended to uniquely identify it. If you don’t see the collector, check the Error Codes list to help troubleshoot.

Install using the command line installer

Add execution permissions to the downloaded Collector file (.sh):
```
chmod +x SumoCollector.sh
```
Run the script with the parameters that you want to configure. See Parameters for the Command Line Installer for a description of the parameters. By default the Collector will be installed in either /opt/SumoCollector or /usr/local/SumoCollector.

Examples

Using an Installation Token:

sudo ./SumoCollector.sh -q -Vsumo.token_and_url=<installationToken> -Vsources=<absolute_filepath>

Using access ID and access key:

sudo ./SumoCollector.sh -q -Vsumo.accessid=<accessId> -Vsumo.accesskey=<accessKey> -Vsources=<absolute_filepath>

Adding proxy settings:

sudo ./SumoCollector.sh -q -Vsumo.accessid=<accessId> -Vsumo.accesskey=<accessKey> -Vsources=<absolute_filepath> -Vproxy.host=<proxyHost> -Vproxy.port=<proxyPort>

Including syncSources and a customized Collector name:

sudo ./SumoCollector.sh -q -Vsumo.accessid=<accessId> -Vsumo.accesskey=<accessKey> -VsyncSources=<absolute_filepath> -Vcollector.name=<name>

Install using the RPM or Debian package

You can use the RPM or Debian package to install a Collector on a Linux 64-bit system.

Install the Collector using the downloaded installation package. For the RPM package, use the command:
```
sudo rpm -i SumoCollector-19.XXX-XX.x86_64.rpm
#Replace XXX-XX with the version number of the package you downloaded.
```
For the Debian package, use the command:
```
sudo dpkg -i SumoCollector-19.XXX-XX.x86_64.deb
#Replace XXX-XX with the version number of the package you downloaded.
```
note
Replace XXX-XX in the command above with the version number of the package you downloaded.
The RPM and Debian packages install the collector in the /opt/SumoCollector directory. By default, the Collector is installed as a system service, but not yet started.
Configure the Collector user.properties file in the /opt/SumoCollector/config/ directory. The Collector uses the settings defined in user.properties to register and start. See user.properties for a full list of all the supported parameters.
To use an access key, provide the accessid and accesskey parameters. For example:
```
name = <collectorName>
accessid = <accessId>
accesskey = <accessKey>
```
To use an installation token, provide the authentication parameters token and url. To use these two parameters you'll need to manually base64 decode the Token String. Once decoded you'll have a string with a token and a URL.
For example, the following decoded Token String:
sumoxxxxxxxxxxxxxxxxxxxxxxxxxxxxhttps://collectors.sumologic.com
would be used as:
```
name = <collectorName>
url=https://collectors.sumologic.com
token=SUMOXXXXXXXXXXXXXXXXXXXXXXXXXXXX
```
note
Starting with collector 19.170+, the installation directory is secured to users belonging to the sumologic_collector group. Modifying user.properties may require sudo privileges. For more information see Enhanced File System Security for Installed Collectors.
(Optional) Provide a JSON Source information. You can pass all Source settings in a UTF-8 encoded JSON file. If you're using a JSON file, you must provide the file before starting the Collector. See Using JSON to configure Sources. Alternatively, you can configure Sources at any time by using the Sumo web app. See Sources.
(Optional) Set the run a user for the Collector if you want the Collector to run as a user other than root. See run as for a Collector.
(Optional on Collector version 19.253-3+ in the Fed deployment) Enable FIPS 140-2 compliant Java Cryptography Extension (JCE) to encrypt your data to Sumo Logic's Fed deployment in US1 only. FIPS mode is not supported for any other deployment. If you are unsure whether you are on the Fed deployment, check our deployments. To enable, locate and run the script configureFipsMode.sh contained in Collector's installation directory under /script:
```
$ sh ./script/configureFipsMode.sh
```
Start the Collector using the following command.
```
sudo service collector start
```

Install using the binary package

Install the version of JRE you want to use from the following location. (The collector requires Java 8 or higher). The binary installation process does not include JRE installation. See the downloads list.
Check the version of Java is 8 or higher:
```
java -version
```
Untar the downloaded binary file inside your desired destination directory to create a subdirectory named sumocollector:
```
tar -xvf SumoCollector_unix_XXX.tar.gz
```
```
Copy the platform-specific wrapper file to the sumocollector directory:
```
cp tanuki/wrapper-<platform> .
```

Make the wrapper, collector, and script directory files executable:

chmod ug+x wrapper-<platform>
chmod ug+x collector
chmod ug+x script/*

Configure the Collector user.properties file in the /opt/SumoCollector/config/ directory. The Collector uses the settings defined in user.properties to register and start. See user.properties for a full list of all the supported parameters.
To use an access key, provide the accessid and accesskey parameters. For example:
```
name = <collectorName>
accessid = <accessId>
accesskey = <accessKey>
wrapper.java.command = java
```
To use an installation token, provide the authentication parameters token and url. To use these two parameters you'll need to manually base64 decode the Token String. Once decoded you'll have a string with a token and a URL.
For example, the following decoded Token String:
```
SUMOXXXXXXXXXXXXXXXXXXXXXXXXXXXXhttps://collectors.sumologic.com
```
would be used as:
```
name = <collectorName>
url=https://collectors.sumologic.com
token=SUMOXXXXXXXXXXXXXXXXXXXXXXXXXXXX
wrapper.java.command = java
```
Set access control for files under the sumocollector directory:
```
sudo script/secureFiles.sh
```
(Optional) Provide JSON Source information. You can pass all Source settings in a UTF-8 encoded JSON file. If you're using a JSON file, you must provide the file before starting the Collector. See Using JSON to configure Sources. Alternatively, you can configure sources at any time by using the Sumo web app. See Sources.
(Optional) Set the run as user for the Collector if you want the Collector to run as a user other than root. See run as for a Collector.
(Optional on Collector version 19.253-3+) Enable FIPS 140-2 compliant Java Cryptography Extension (JCE) to encrypt your data. Once enabled, the Collector version cannot be downgraded below version 19.253-1. To enable, locate and run the script configureFipsMode.sh contained in Collector's installation directory under /script:
```
$ sh ./script/configureFipsMode.sh
```
Install the Collector as a service. Use the following command to install the Collector as a service that is started when the machine starts.
```
sudo ./collector install
```
Start the Collector service. Use the following command to start the collector service.
```
sudo ./collector start
```
To verify that the collector is installed, go to Manage Data > Collection > Collection in the Sumo web app and verify that you can see the collector.

Uninstall the collector

Uninstalling a collector requires the following two steps:

Uninstall the collector from the Linux system using any of these methods:

UI installer
Command line installer
RPM/Debian package
Binary package

Remove the collector from Sumo Logic

Uninstall using the UI Installer

On your system, in the Applications folder, find the Sumo Logic Collector folder.
Double-click the file Sumo Logic Collector Uninstaller.
If prompted, select your language and click OK.
Enter the user name and password for the system.
When the Sumo Logic Collector Uninstall wizard is displayed, click Next to remove the collector.
When the success message is displayed, click Finish.

Uninstall using the command line

In a terminal prompt, change the directory to the collector installation directory. By default, the collector will be installed in either /opt/SumoCollector or /usr/local/SumoCollector.
```
cd /usr/local/SumoCollector
```
Run the uninstall binary with the -q option. The -q option executes the command without presenting additional prompts.
```
sudo ./uninstall -q
```

Uninstall using the RPM/Debian packages

For the RPM package, use the command:

sudo rpm -e SumoCollector

For the Debian package, use the command:

sudo dpkg -r SumoCollector

Uninstall using the binary package

Uninstall the collector service.

sudo <Collector Installation Directory>/collector remove

Remove the collector installation directory.

sudo rm -rf <Collector Installation Directory>

(Optional) On some distributions, for instance, Ubuntu, you may need to re-synchronize the daemon setting before installing the collector again.
```
sudo systemctl daemon-reload
```

Remove the collector from the web app

In Sumo Logic select Manage Data > Collection > Collection.
Find the collector you want to remove, and click Delete.
When the Confirm dialog displays, click OK.

A success message is displayed and the collector is removed from the list.

System Requirements ​

Download ​

Install a collector on Linux​

Install using the UI installer ​

Install using the command line installer​

Install using the RPM or Debian package​

Install using the binary package​

Uninstall the collector​

Uninstall using the UI Installer​

Uninstall using the command line​

Uninstall using the RPM/Debian packages​

Uninstall using the binary package​

Remove the collector from the web app ​